• Jiangsu Yangzhong Baqiao Town Yangzi Aluminum Processing Plant Industrial Park
  • +86 +86 18168581630 / 0511-88553066
  • [email protected]

Application Interpretation of Aluminum Composite Tape

HomeNews

Application Interpretation of Aluminum Composite Tape

News 2021年11月15日 165

In several communication cables, metallic element – plastic composite belt is commonly used as its adhesive comprehensive protection. this may have an honest shielding impact. With a 0.30mm thick double-sided plastic coated metallic element plastic composite belt, the composite belt is wrapped within the cable core belt, and also the 2 sides square measure connected to be quite 6mm and pasted along. Generally, the mechanical protection layer of the metallic element plastic composite belt will be additional to the cable, therefore increasing the mechanical strength of the cable and rising the anti-erosion ability. phonephone cabling designed to be used as a vulnerable space for mechanical harm and erosion. It is vital to notice that within the case of product delivery of the metallic element plastic composite belt, the corresponding product qualification certificate and quality guarantee shall be provided. within the method of transportation, acceptable measures ought to be taken to avoid moistness or mechanical harm. In addition, in storage, it’s usually wont to store metallic element plastic composite product in an exceedingly clean, dry and well-ventilated warehouse. At identical time, avoid heat supply and avoid direct daylight. additionally, the storage temperature shall not exceed fifty fifty. In order to make sure the impact, 2 or additional connectors don’t seem to be allowed to be employed in identical volume. However, there will be a solder joint, and also the general length is among one.4km, and there’s a joint with a length of one.4km and on top of, permitting 2 connections. In general, the thickness of the connection shall not exceed one.5 times of its original thickness, and also the plastic layer shall be rebuilt. The contact ought to be marked and also the distance between the 2 joints mustn’t be but 305m. The enduringness of the metallic element – plastic composite belt with joints shall not be but eighty fifth of the adjacent unbonded metallic element plastic composite belt.